The technical plastics that others integrate
Technical components for machines, equipment and industrial products.
2
IN-HOUSE TECHNOLOGIES • THERMO + INJECTION MOLDING
+10
TYPES OF CUSTOM COMPONENTS
8
INDUSTRIAL SECTORS SERVED
0,5g-12kg
PART RANGE PER UNIT
Components that other companies integrate
We manufacture the technical plastic components that go inside machines, household appliances, vehicles and industrial equipment. If you design machinery, lifting systems, hospitality equipment, household appliances or boilers, you probably need components that replace metal, fiberglass or wood. That is where we fit. We start from the customer 3D or a functional brief. We master the two key technical plastics technologies — thermoforming and injection molding — and choose according to geometry, volume and requirements.
Ten families, one single factory
Each component calls for its own engineering: polyacetal gears, tribological PA bushings with additives, large ABS or PC housings. Ten key families in technical plastics.
01
Custom components
Any complex geometry, designed and manufactured for your application.
02
Housings and covers
Covers, hoods and enclosures for machines and equipment.
03
Trim parts
Aesthetic and functional parts for product finishing.
04
Technical gears
Transmission without lubrication, silent and wear-resistant.
05
Bushings and sleeves
Grease-free sliding elements for shafts and rotations.
06
Technical rollers
Guide, transport or pressure rollers for industrial lines.
07
Tribological components
Designed for friction and wear — self-lubricated.
08
Technical profiles
Extruded or thermoformed sections for guides and structures.
09
Supports and flanges
Structural fasteners and technical clamps.
10
Clips and fasteners
Quick joining elements without fasteners or welding.
Four components, four industries
Each component has a company behind it that replaced its traditional part with a custom thermoplastic. Four cases, four industries.
01
Caso 01
Thermoformed hood for heavy machinery
Large-format cover with integrated ribs for structural reinforcement. Replaces traditional manufacture in painted sheet metal with its corresponding painting, assembly and welding process. A single part, color throughout, textured matte finish directly from the mold.
02
Caso 02
Solar thermal collector housing
Large-format thermoformed enclosure for a solar collector. Permanent UV resistance, dimensional stability under thermal expansion, and compatibility with tempered glass. Replaces galvanized sheet with lower weight, better insulation and no oxidation.
03
Caso 03
Enclosure for hot water tank
Thermoformed cover that protects and stabilizes the tank of an industrial heating system. Replaces the traditional metal enclosure with lower weight, no oxidation and better thermal insulation. Bolted around the perimeter for maintenance access.
04
Caso 04
Transparent component for playground
Transparent cylindrical tube reinforced with bolted rings for play structures and recreational areas. Full visibility for adult supervision, impact resistance, no sharp edges. Transparent PETG thermoformed in large format.
Industries where our components are inside
Industrial machinery
Housings, covers, hoods and trim parts for machine tools, presses and production equipment. → Hoods • covers → Moving parts covers
Lifting equipment
Components for cranes and elevators: control panel covers, control boxes, injection-molded panels. → Control panels → elevator components
Food and hospitality
Technical components for hospitality machines, industrial ovens, vending machines and professional kitchen equipment. → Hospitality machines → Thermoforming and injection molding
Agricultural
Hoods for tractors, sprayer outlets, tanks and housings for agricultural machinery in demanding conditions. → Tractor hood → Sprayer outlet
Boilers and HVAC
Enclosures for hot water tanks, boiler covers and heating equipment housings. → Tank enclosure → Boiler housings
Electronics
Housings for electronic equipment, electrical cabinets, technical racks and instrumentation enclosures. → Equipment covers → ESD optional
Civil works machinery
Housings for construction electrical equipment, covers for moving parts, motor covers and technical chassis. → Moving parts covers → Thermo / injection
Renewable energies
Housings for solar collectors, inverter covers, panel structures and UV-resistant technical components. → Solar collector → UV resistance
Three reasons for a single source in technical plastic.
01
Technology according to your part
If your component comes out better by injection molding, we do injection molding. If it comes out better by thermoforming, we thermoform it. If it requires both, we combine them.
02
We design with you
We do not produce the CAD we receive. We review it, suggest geometry, thickness and material optimizations. Part of the engineering team.
03
Complete chain
We extrude the sheet. We thermoform in-house. We machine for final finishing. Traceability and quality control under the same roof.
Do you have a component that is still metal?
Send us the 3D or a functional brief with the requirements (load, temperature, chemistry, aesthetics). Within 48h you receive a proposal for technology, material and indicative cost.
RESPONSE IN 48H — CAD ANALYSIS AT NO COST — CONFIDENTIAL