Machining
CNC
MILLING · DRILLING · TRIMMING · ENGRAVING
Manufacture of molds in resin, aluminum and steel. Post-processing of thermoformed and injection-molded parts. Simultaneous 5-axis machining for complex geometries without repositioning.
±0.01mm
TOLERANCE
5axes
SIMULTANEOUS
30krpm
MAX SPINDLE
What we do
A simultaneous 5-axis center combines in a single setup what previously required multiple machines. Milling, drilling, trimming and finishing on plastic parts, molds and composites with surface finish quality Ra < 0.4 μm.
01
Milling
Roughing and finishing of complex surfaces on 3, 4 and 5 axes. Mold cavities, Class A surfaces and organic shapes with ball, toroidal and flat end mills. Ra < 0.4 um.
02
Drilling
Precision holes at any angle thanks to 5-axis positioning. Threading, countersinking and through holes in plastics, resins and light alloys. From Ø 0.5 mm.
03
Trimming
Contour trimming on thermoformed and injection-molded parts. Removes excess edges following exactly the CAD profile at up to 30,000 pm, with disc or milling tools.
04
Engraving
Roughing and finishing of surfaces. Surface textures, reference marking and logo engraving on molds and parts. Grain patterns, matte/semi-matte finishes and traceability directly on the material.
Manufacture of Molds
The CNC center turns a raw block —resin, aluminum or steel— into the finished mold with cavities, cooling channels, fit tolerances and working surface quality.
Post-process Thermoforming
Most thermoformed parts require subsequent finishing. The 5-axis executes trimming, drilling and edge forming with a precision impossible to achieve manually or with conventional tooling.
What we machine
We work with both materials for mold manufacture and technical plastics and composites for post-processing. The machining strategy, tool and cutting parameters are adapted to each material.
01
Epoxy Resin
Molding resin / tooling board
PROTOTYPE MOLDS • SHORT RUNS
02
Aluminum
Al 7075 / Al 6061T6
THERMOFORMING MOLDS • MEDIUM SERIES
03
Steel
P20 / H13 / 1.2344
INJECTION MOLDS • HIGH-VOLUME SERIES
04
ABS / PC
Technical thermoplastics
POST-PROCESS • TRIMMING
05
PETG / PP
Semi-technical plastics
PACKAGING TRIMMING • EDGES
06
Composites
CFRP • GFRP • Kevlar
AERONAUTICS • NAVAL
The link between processes
In the thermoforming → machining chain, the CNC center transforms a part with excess into the final component ready for assembly or delivery to the customer.
Contour trimming
Precise perimeter cutting following exactly the CAD profile at up to 30,000 rpm, without manual tolerances.
Holes and perforations
Any diameter and angle – ventilation, fastening, cable passage – impossible in forming.
Edge finishing
Chamfers, radii and bevels that eliminate sharp edges and define the final appearance and assembly.
Assembly geometries
Grooves, guides, recesses and fits that allow joining the plastic part with metal subassemblies with fit tolerance.
Industries we serve
Aeronautics
Trimming of CFRP / GFRP composites, assembly fixtures, inspection patterns and cabin interior structures.
→ CFRP trimming → Jigs
Automotive
Post-process of thermoformed interior panels, trunk covers, spoilers and sensor housings.
→ Interior panels → Molds
Médico
Molds for sterile containers, checking fixtures for diagnostic parts and laboratory equipment housings.
→ Sterile molds → Checking
Packaging
Aluminum molds for thermoforming of trays, blisters and presentation containers in medium – high series.
→ Al molds → Trays
Defense
Trays, transport and hermetic boxes, separators…
Your part, our 5 axes
Tell us what you need to machine: mold, post-process or technical part. We analyze the CAD, select the optimal strategy and tool, and send you a quote within 48 hours.
RESPONSE IN 48H — CAD ANALYSIS AT NO COST — CONFIDENTIAL